VAL Avionics NAV 2000 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Récepteur VAL Avionics NAV 2000. VAL Avionics NAV 2000 Installation guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 401
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
SkyView
System Installation Guide
This product is not TSO’d and cannot be installed into traditional
FAA Part 23 and similarly type-certificated aircraft
Document 101320-017, Revision R
For use with firmware version 11.0
August, 2014
Copyright © 2009-2014 by Dynon Avionics, Inc.
Permission to print this manual is granted to third parties.
Vue de la page 0
1 2 3 4 5 6 ... 400 401

Résumé du contenu

Page 1 - SkyView

SkyView System Installation Guide This product is not TSO’d and cannot be installed into traditional FAA Part 23 and similarly type-certificated airc

Page 2

x SkyView System Installation Guide - Revision R Revision Revision Date Description radio, Garmin / Apollo SL40 COM radio, Val Avionics NAV 2000 NAV

Page 3 - Limited Warranty

SV-ADAHRS-200/201 Installation and Configuration 5-10 SkyView System Installation Guide - Revision R certificate itself. Similar to the above, yo

Page 4 - Revision History

SV-ADAHRS-200/201 Installation and Configuration SkyView System Installation Guide - Revision R 5-11 When a pitot or static test is performed the

Page 6

SkyView System Installation Guide - Revision R 6-1 6. SV-MAP-270 Navigation Mapping Software Purchase and Setup Starting with SkyView software ve

Page 7

SV-MAP-270 Navigation Mapping Software Purchase and Setup 6-2 SkyView System Installation Guide - Revision R  Use of MAP menu and features, inc

Page 8

SV-MAP-270 Navigation Mapping Software Purchase and Setup SkyView System Installation Guide - Revision R 6-3  Basemap and Cultural Data: Databa

Page 9

SV-MAP-270 Navigation Mapping Software Purchase and Setup 6-4 SkyView System Installation Guide - Revision R If you have difficulty downloading

Page 10

SV-MAP-270 Navigation Mapping Software Purchase and Setup SkyView System Installation Guide - Revision R 6-5 U.S. & Canada United Kingdom Eur

Page 11

SV-MAP-270 Navigation Mapping Software Purchase and Setup 6-6 SkyView System Installation Guide - Revision R Base map and Cultural Data Base map

Page 12

SkyView System Installation Guide - Revision R 7-1 7. SV-EMS-220/221 Installation and Configuration This chapter contains information and diagram

Page 13 - Table of Contents

SkyView System Installation Guide - Revision R xi Revision Revision Date Description Sensor definition files do not match between SkyView displays

Page 14

SV-EMS-220/221 Installation and Configuration 7-2 SkyView System Installation Guide - Revision R Figure 26–Suggested SV-EMS-220/221 Installatio

Page 15 - Table of Contents

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-3 Physical Installation The diagram below shows t

Page 16

SV-EMS-220/221 Installation and Configuration 7-4 SkyView System Installation Guide - Revision R SkyView Network Connection Connect the EMS modu

Page 17

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-5 Dynon Part Number Description Mates with… 10039

Page 18

SV-EMS-220/221 Installation and Configuration 7-6 SkyView System Installation Guide - Revision R This section explains how to use Table 13–Senso

Page 19 - Warning

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-7 Table 13–Sensor and Transducer Compatibility Le

Page 20 - Getting Started

SV-EMS-220/221 Installation and Configuration 7-8 SkyView System Installation Guide - Revision R Pin EMS 37-pin Harness Wire Color Function Sens

Page 21

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-9 Pin Rotax 912 Harness (except 912 iS) (100399-0

Page 22

SV-EMS-220/221 Installation and Configuration 7-10 SkyView System Installation Guide - Revision R Figure 29 is a pin insertion view (rear) of th

Page 23 - 2. System Planning

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-11 EMS Module Output Pin Output Current Limit Wi

Page 25 - Includes SV52, SV52C, SV52L

SV-EMS-220/221 Installation and Configuration 7-12 SkyView System Installation Guide - Revision R Pin EMS 37-pin Harness Wire Color Sensor (with

Page 26 - Temperature Specifications

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-13 Pin EMS 25-pin Thermocouple Harness Wire Color

Page 27

SV-EMS-220/221 Installation and Configuration 7-14 SkyView System Installation Guide - Revision R Example Lycoming/Continental 4-cylinder Fuel I

Page 28 - Location Requirements

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-15 Pin EMS 25-pin Thermocouple Harness Wire Color

Page 29

SV-EMS-220/221 Installation and Configuration 7-16 SkyView System Installation Guide - Revision R Lycoming/Continental 6-cylinder Carbureted (SV

Page 30

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-17 Pin EMS 25-pin Thermocouple Harness Wire Color

Page 31 - SV-GPS-250

SV-EMS-220/221 Installation and Configuration 7-18 SkyView System Installation Guide - Revision R Example Lycoming/Continental 6-cylinder Fuel I

Page 32 - SV-BAT-320

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-19 Pin EMS 25-pin Thermocouple Harness Wire Color

Page 33 - SV-ADSB-470

SV-EMS-220/221 Installation and Configuration 7-20 SkyView System Installation Guide - Revision R Example Jabiru 2200 (SV-EMS-220) Pin EMS 37-pi

Page 34 - SkyView System Construction

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-21 Pin EMS 25-pin Thermocouple Harness Wire Color

Page 35 - SkyView Network Hub

SkyView System Installation Guide xiii Table of Contents Contact Information ...

Page 36 - Ethernet Connection

SV-EMS-220/221 Installation and Configuration 7-22 SkyView System Installation Guide - Revision R Example Jabiru 3300 (SV-EMS-220) Pin EMS 37-pi

Page 37

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-23 Pin EMS 25-pin Thermocouple Harness Wire Color

Page 38 - Example SkyView Systems

SV-EMS-220/221 Installation and Configuration 7-24 SkyView System Installation Guide - Revision R Example Rotax 912 (carbureted) (SV-EMS-220) Pi

Page 39

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-25 36 Blue or Unwired Not connected 37 Green or U

Page 40

SV-EMS-220/221 Installation and Configuration 7-26 SkyView System Installation Guide - Revision R Example Rotax 912 iS (SV-EMS-221) Pin EMS 37-p

Page 41 - HSI Requirements

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-27 Pin EMS 37-pin Harness Wire Color Sensor (with

Page 42

SV-EMS-220/221 Installation and Configuration 7-28 SkyView System Installation Guide - Revision R Other connections, including fuel pressure, a

Page 43 - Screen Synchronization

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-29 Example 9-cylinder Radial (Using Dual SV-EMS-2

Page 44 - Display Bezel Layout

SV-EMS-220/221 Installation and Configuration 7-30 SkyView System Installation Guide - Revision R 35 Green Not Connected 36 Blue or Unwired Not

Page 45 - Operation Basics

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-31 3 Red Harness does not have a wire in this pin

Page 46

Table of Contents xiv SkyView System Installation Guide - Revision R 4. SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-1 Phy

Page 47 - Menu Navigation

SV-EMS-220/221 Installation and Configuration 7-32 SkyView System Installation Guide - Revision R Dual Engine Support using two SV-EMS-220/221s

Page 48

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-33 All sensors and transducers must be properly

Page 49 - How to Enter the Setup Menus

SV-EMS-220/221 Installation and Configuration 7-34 SkyView System Installation Guide - Revision R o Available from http://www.bandcspecialty.co

Page 50 - Screens and Menus

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-35 Rotax 914 The 914 uses threaded EGT probes tha

Page 51 - Setup Menu

SV-EMS-220/221 Installation and Configuration 7-36 SkyView System Installation Guide - Revision R incorrect. Dynon Avionics sells and supports a

Page 52 - System Setup Menu

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-37 Pin Wire Color Function 34 Blue Low Voltage RP

Page 53 - LOCAL DISPLAY SETUP Menu

SV-EMS-220/221 Installation and Configuration 7-38 SkyView System Installation Guide - Revision R If, after setting the PULS/REV R and L value

Page 54 - PFD SETUP Menu

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-39 For signals that have a peak voltage of 12V or

Page 55 - Autopilot Setup Menu

SV-EMS-220/221 Installation and Configuration 7-40 SkyView System Installation Guide - Revision R Use an Adel clamp similar to the above to secu

Page 56 - Hardware Calibration Menu

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-41 If you use Teflon tape or other seal, ensure

Page 57 - How to Update Firmware

Table of Contents SkyView System Installation Guide - Revision R xv Tools and Equipment Required ...

Page 58

SV-EMS-220/221 Installation and Configuration 7-42 SkyView System Installation Guide - Revision R 1/8-27 NPT 5/8-18 UNF Figure 37 - Rotax Oil P

Page 59 - How to Load and Delete Files

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-43 When tightening the 100409-001 5/8-18 UNF Oil

Page 60

SV-EMS-220/221 Installation and Configuration 7-44 SkyView System Installation Guide - Revision R Connect the green wire to SV-EMS-220/221 D37 g

Page 61

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-45 For Dynon Avionics P/N 100411-000 and P/N 100

Page 62

SV-EMS-220/221 Installation and Configuration 7-46 SkyView System Installation Guide - Revision R Configure the pin you chose: (SETUP MENU >

Page 63

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-47  Install the Fuel Flow Transducer with the t

Page 64

SV-EMS-220/221 Installation and Configuration 7-48 SkyView System Installation Guide - Revision R Figure 40–Rotax Fuel Flow Sensors (Single-end

Page 65 - Figure 19–SV-D700 Dimensions

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-49 Once a capacitive fuel level sensing system i

Page 66

SV-EMS-220/221 Installation and Configuration 7-50 SkyView System Installation Guide - Revision R Capacitance-to-Voltage Converter installation

Page 67

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-51 Figure 42–Recommended Amps Shunt Locations (s

Page 68 - Network Setup and Status

Table of Contents xvi SkyView System Installation Guide - Revision R Physical Installation ...

Page 69

SV-EMS-220/221 Installation and Configuration 7-52 SkyView System Installation Guide - Revision R shunt. Slide the ring terminals onto them and

Page 70

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-53 o Because each individual CS-01 varies somewh

Page 71 - Serial Devices

SV-EMS-220/221 Installation and Configuration 7-54 SkyView System Installation Guide - Revision R Note: If you are converting a Dynon D10/D100 p

Page 72

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-55 Trim and flaps position potentiometers must b

Page 73

SV-EMS-220/221 Installation and Configuration 7-56 SkyView System Installation Guide - Revision R corresponds to the desired general purpose inp

Page 74

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-57 Rotax 914 Air Box Temperature Rotax supplies o

Page 75

SV-EMS-220/221 Installation and Configuration 7-58 SkyView System Installation Guide - Revision R  Install the GEAR contact that when the amph

Page 76 - Table 10–Icarus Format

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-59 External EMS Warning Light SV-EMS-220/221 D37

Page 77

SV-EMS-220/221 Installation and Configuration 7-60 SkyView System Installation Guide - Revision R Hobbs time is a simple timer that runs wheneve

Page 78

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-61 The alarm type for oil temperature is the “se

Page 79

Table of Contents SkyView System Installation Guide - Revision R xvii Audio Shielding ...

Page 80

SV-EMS-220/221 Installation and Configuration 7-62 SkyView System Installation Guide - Revision R Note that it is critical that you should check

Page 81

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-63 1. Scroll through the different parameters us

Page 82 - USB Usage and Accessibility

SV-EMS-220/221 Installation and Configuration 7-64 SkyView System Installation Guide - Revision R setting. The system will not allow you to set

Page 83

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-65 enter a pulses/gallon value of 29590 in the pu

Page 84 - Display Setup

SV-EMS-220/221 Installation and Configuration 7-66 SkyView System Installation Guide - Revision R  PRESET FUEL CAPACITY – this can be used to

Page 85 - Serial Port Configuration

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-67 Example Voltmeter Setup Assume this sensor was

Page 86

SV-EMS-220/221 Installation and Configuration 7-68 SkyView System Installation Guide - Revision R Example Contact Sensor Setup Assume this senso

Page 87 - Brightness Setup

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-69 Example RPM Setup Assume this sensor was mappe

Page 88 - Aircraft Information

SV-EMS-220/221 Installation and Configuration 7-70 SkyView System Installation Guide - Revision R Example Oil Temperature Sensor Setup Assume th

Page 89 - Screen Layout Setup

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-71 message will show up in the message box on the

Page 90 - Touch Setup

Table of Contents xviii SkyView System Installation Guide - Revision R DYNON SYSTEM Serial Data Format ...

Page 91

SV-EMS-220/221 Installation and Configuration 7-72 SkyView System Installation Guide - Revision R Figure 50–Oil Temperature Widget The white bo

Page 92

SV-EMS-220/221 Installation and Configuration SkyView System Installation Guide - Revision R 7-73 Figure 52–Example Oil Temperature Widget Si

Page 94 - Magnetic Heading Calibration

SkyView System Installation Guide - Revision R 8-1 8. SV-GPS-250 Installation and Configuration This chapter contains information that specifical

Page 95 - Probe Location

SV-GPS-250 Installation and Configuration 8-2 SkyView System Installation Guide - Revision R Physical Installation For most reliable performan

Page 96

SV-GPS-250 Installation and Configuration SkyView System Installation Guide - Revision R 8-3 curved surfaces. For extra protection, you may use

Page 97 - PFD-Related Settings

SV-GPS-250 Installation and Configuration 8-4 SkyView System Installation Guide - Revision R Figure 55–SV-GPS-250 Connected to Multiple SkyVie

Page 98 - Airspeed Limitations

SV-GPS-250 Installation and Configuration SkyView System Installation Guide - Revision R 8-5 Figure 56 - Dual SV-GPS-250 Connected to Multiple

Page 100 - Other ADAHRS Calibrations

SkyView System Installation Guide - Revision R 9-1 9. SV-BAT-320 Installation This chapter contains information that specifically applies to the

Page 101

SkyView System Installation Guide 1-1 1. Introduction The printed version of this guide is in grayscale. Some figures and diagrams contain importan

Page 102

SV-BAT-320 Installation 9-2 SkyView System Installation Guide - Revision R Physical Installation The diagram below shows the mounting dimension

Page 103 - License Information

SV-BAT-320 Installation SkyView System Installation Guide - Revision R 9-3 Electrical Connection Connect the SV-BAT-320 module’s connector to t

Page 104 - Databases

SV-BAT-320 Installation 9-4 SkyView System Installation Guide - Revision R Detailed Battery Status Check Enter the Display Hardware Information

Page 105 - Terrain Data

SV-BAT-320 Installation SkyView System Installation Guide - Revision R 9-5 powered up will gradually diminish. When this time is less than 45 m

Page 107 - Charts and Airport Diagrams

SkyView System Installation Guide - Revision R 10-1 10. Autopilot Servo Installation, Configuration, and Calibration This chapter contains generi

Page 108 - Loading Databases

Autopilot Servo Installation, Configuration, and Calibration 10-2 SkyView System Installation Guide - Revision R If you no longer have this capa

Page 109

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-3 http://forum.dynonavionics.com

Page 110

Autopilot Servo Installation, Configuration, and Calibration 10-4 SkyView System Installation Guide - Revision R provides sufficient torque to m

Page 111 - Physical Installation

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-5 Push-Pull Servo Dimensions Use

Page 113 - Table 12–EMS Wire Harnesses

Introduction 1-2 SkyView System Installation Guide - Revision R Dynon Avionics Product Registration Please take a moment to register your Dynon

Page 114

Autopilot Servo Installation, Configuration, and Calibration 10-6 SkyView System Installation Guide - Revision R Linkage Mount Position Force an

Page 115

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-7 called out maximum linear trave

Page 116

Autopilot Servo Installation, Configuration, and Calibration 10-8 SkyView System Installation Guide - Revision R Figure 61 - Servo Range of Mot

Page 117

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-9 mode SETUP MENU > HARDWARE C

Page 118

Autopilot Servo Installation, Configuration, and Calibration 10-10 SkyView System Installation Guide - Revision R Autopilot System Electrical In

Page 119 - P/N 456180: 20mA

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-11 Servo Electrical Installation

Page 120

Autopilot Servo Installation, Configuration, and Calibration 10-12 SkyView System Installation Guide - Revision R Power Consumption Section of t

Page 121

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-13 Note that the kit contains 20

Page 122

Autopilot Servo Installation, Configuration, and Calibration 10-14 SkyView System Installation Guide - Revision R (Optional) External LEVEL Butt

Page 123

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-15 Considerations for External L

Page 124

SkyView System Installation Guide - Revision R 1-3 5. The EMS 37-pin Main Sensor Harness includes a 9-pin connector that is wired to pins 11 (Ora

Page 125

Autopilot Servo Installation, Configuration, and Calibration 10-16 SkyView System Installation Guide - Revision R without the wiring becoming wa

Page 126

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-17 installed incorrectly. The ser

Page 127

Autopilot Servo Installation, Configuration, and Calibration 10-18 SkyView System Installation Guide - Revision R SINGLE CUE (INVERTED-V): Uses

Page 128

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-19 1. Return to the Main Menu. 2

Page 129

Autopilot Servo Installation, Configuration, and Calibration 10-20 SkyView System Installation Guide - Revision R The default climb vertical spe

Page 130

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-21 Figure 69–Top Bar SPD Indicat

Page 131

Autopilot Servo Installation, Configuration, and Calibration 10-22 SkyView System Installation Guide - Revision R The minimum airspeed parameter

Page 132 - P/N 456180 only)

Autopilot Servo Installation, Configuration, and Calibration SkyView System Installation Guide - Revision R 10-23 If the autopilot is engaged wh

Page 134

SkyView System Installation Guide - Revision R 11-1 11. SV-XPNDR-261/262 Installation, Configuration, and Testing There are two transponder modul

Page 135

Introduction 1-4 SkyView System Installation Guide - Revision R 14. Common issues for setting up SV-XPNDR-261/262: a. Ensure that there is a v

Page 136

SV-XPNDR-261/262 Installation, Configuration, and Testing 11-2 SkyView System Installation Guide - Revision R The SV-XPNDR-261/262 transponder re

Page 137

SV-XPNDR-261/262 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 11-3 Figure 75 - SV-XPNDR-261/262 Dime

Page 138

SV-XPNDR-261/262 Installation, Configuration, and Testing 11-4 SkyView System Installation Guide - Revision R Electrical Connections Harness Cons

Page 139

SV-XPNDR-261/262 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 11-5 Pin Function Notes 15 11-33V DC Co

Page 140

SV-XPNDR-261/262 Installation, Configuration, and Testing 11-6 SkyView System Installation Guide - Revision R The following figure depicts how t

Page 141 - Tools and Equipment Required

SV-XPNDR-261/262 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 11-7 Serial Port SkyView D37 SV-XPNDR-2

Page 142 - Voltmeter Inputs

SV-XPNDR-261/262 Installation, Configuration, and Testing 11-8 SkyView System Installation Guide - Revision R Figure 78 - All Possible SV-XPNDR-

Page 143

SV-XPNDR-261/262 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 11-9 Note: The transponder power input

Page 144 - Tachometer

SV-XPNDR-261/262 Installation, Configuration, and Testing 11-10 SkyView System Installation Guide - Revision R Ident Switch Input (optional) SkyV

Page 145 - Figure 31–Magneto Pick Off

SV-XPNDR-261/262 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 11-11 Some of the protocols listed abov

Page 146

SkyView System Installation Guide - Revision R 2-1 2. System Planning Installers should read and understand this chapter before proceeding with

Page 147 - Manifold Pressure Sensor

SV-XPNDR-261/262 Installation, Configuration, and Testing 11-12 SkyView System Installation Guide - Revision R Antenna Ground Plane When a conven

Page 148 - Oil Pressure Sensor

SV-XPNDR-261/262 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 11-13 The following table is a guide to

Page 149

SV-XPNDR-261/262 Installation, Configuration, and Testing 11-14 SkyView System Installation Guide - Revision R Antenna TNC Connector This section

Page 150 - Oil Temperature Sensor

SV-XPNDR-261/262 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 11-15  Navigate to the serial port th

Page 151 - Fuel Pressure Sensor

SV-XPNDR-261/262 Installation, Configuration, and Testing 11-16 SkyView System Installation Guide - Revision R you must convert it to hexadecimal

Page 152 - 0-80 PSI

SV-XPNDR-261/262 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 11-17  TIS TRAFFIC: Enables the displ

Page 153

SV-XPNDR-261/262 Installation, Configuration, and Testing 11-18 SkyView System Installation Guide - Revision R o SKYVIEW: SkyView reports its GP

Page 154 - Fuel Flow Sensor

SV-XPNDR-261/262 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 11-19 Post Installation Checks Post ins

Page 155

SV-XPNDR-261/262 Installation, Configuration, and Testing 11-20 SkyView System Installation Guide - Revision R Note that after the transponder ve

Page 156 - Fuel Level Sensor

SV-XPNDR-261/262 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 11-21 To determine whether your transpo

Page 157

System Planning 2-2 SkyView System Installation Guide - Revision R Power Consumption Table 2 contains power specifications for typical SkyView

Page 159

SkyView System Installation Guide - Revision R 12-1 12. SV-ARINC-429 Installation and Configuration SkyView can connect to advanced GPS/NAV devic

Page 160

SV-ARINC-429 Installation and Configuration 12-2 SkyView System Installation Guide - Revision R Additional mounting location, orientation, and o

Page 161 - Rotax CHT Sensors

SV-ARINC-429 Installation and Configuration SkyView System Installation Guide - Revision R 12-3 SV-ARINC-429 Pinout Figure 81 - SV-ARINC-429

Page 162

SV-ARINC-429 Installation and Configuration 12-4 SkyView System Installation Guide - Revision R Pin Function Notes 1 No Connect - 2 No Connect -

Page 163 - Coolant Pressure Sensor

SV-ARINC-429 Installation and Configuration SkyView System Installation Guide - Revision R 12-5 ARINC Device Connections The SV-ARINC-429 has tw

Page 164 - Coolant Temperature Sensor

SV-ARINC-429 Installation and Configuration 12-6 SkyView System Installation Guide - Revision R Figure 83 - Garmin 430/530 SV-ARINC-429 Connect

Page 165 - Contacts

SV-ARINC-429 Installation and Configuration SkyView System Installation Guide - Revision R 12-7 SkyView Settings SETUP MENU > SYSTEM SETUP

Page 166 - General Purpose Thermocouple

SV-ARINC-429 Installation and Configuration 12-8 SkyView System Installation Guide - Revision R Figure 84 - Garmin GTN Series SV-ARINC-429 Conn

Page 167 - Engine Information

SV-ARINC-429 Installation and Configuration SkyView System Installation Guide - Revision R 12-9 SkyView Settings SETUP MENU > SYSTEM SETUP &g

Page 168 - Rotax 912 Behavior

System Planning SkyView System Installation Guide - Revision R 2-3 SV5210 2.8 A (moving 100% torque) 1.4 A (moving 100% torque) 5A Heated AOA

Page 169 - EMS Sensor Input Mapping

SV-ARINC-429 Installation and Configuration 12-10 SkyView System Installation Guide - Revision R Figure 85 - Garmin 480 SV-ARINC-429 Connection

Page 170 - Table 39–Example Sensor Map

SV-ARINC-429 Installation and Configuration SkyView System Installation Guide - Revision R 12-11 SV-ARINC-429 Related Settings Go to the ARINC-4

Page 172

SkyView System Installation Guide - Revision R 13-1 13. Vertical Power VP-X Integration and Configuration Dynon SkyView can interface with the Ve

Page 173

Vertical Power VP-X Integration and Configuration 13-2 SkyView System Installation Guide - Revision R LOCAL DISPLAY SETUP > DISPLAY HARDWARE

Page 174

Vertical Power VP-X Integration and Configuration SkyView System Installation Guide - Revision R 13-3  Choose an unused serial port on each di

Page 175 - Example Voltmeter Setup

Vertical Power VP-X Integration and Configuration 13-4 SkyView System Installation Guide - Revision R The VP-X settings in the SETUP MENU > V

Page 176 - Example Contact Sensor Setup

Vertical Power VP-X Integration and Configuration SkyView System Installation Guide - Revision R 13-5  On a SkyView display that is displaying

Page 178 - Temperature

SkyView System Installation Guide - Revision R 14-1 14. SV-ADSB-470 Installation, Configuration, and Testing SkyView can receive traffic and weat

Page 179 - EMS Screen Layout Editor

System Planning 2-4 SkyView System Installation Guide - Revision R Physical Specifications Dimensions Weight SV-D1000T 10.32" W x 7.06&quo

Page 180

SV-ADSB-470 Installation, Configuration, and Testing 14-2 SkyView System Installation Guide - Revision R Figure 88 - Suggested SV-ADSB-470 Insta

Page 181 - EMS Sensor Calibration

SV-ADSB-470 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 14-3 Figure 90 - SV-ADSB-470 Dimensions/Conn

Page 182

SV-ADSB-470 Installation, Configuration, and Testing 14-4 SkyView System Installation Guide - Revision R sources of these products. You may also

Page 183

SV-ADSB-470 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 14-5 Serial Port SkyView D37 SV-ADSB-470 D9

Page 184

SV-ADSB-470 Installation, Configuration, and Testing 14-6 SkyView System Installation Guide - Revision R  Record the SkyView serial port that y

Page 185 - Serial Connection

SV-ADSB-470 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 14-7 accomplish, but is more difficult in a c

Page 186

SV-ADSB-470 Installation, Configuration, and Testing 14-8 SkyView System Installation Guide - Revision R A dual crimp style BNC connector can be

Page 187 - Configuration

SV-ADSB-470 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 14-9  Confirm that the DEVICE line reads SV

Page 189 - 9. SV-BAT-320 Installation

SkyView System Installation Guide - Revision R 15-1 15. Accessory Installation and Configuration This chapter contains information regarding inst

Page 190

System Planning SkyView System Installation Guide - Revision R 2-5 General System Installation Tips Aircraft construction involves a variety o

Page 191 - Battery Status Icon

Accessory Installation and Configuration 15-2 SkyView System Installation Guide - Revision R Failure Warning Designed to meet the indication r

Page 192

Accessory Installation and Configuration SkyView System Installation Guide - Revision R 15-3 Heater Controller Module Physical Installation Fi

Page 193 - Test Procedure

Accessory Installation and Configuration 15-4 SkyView System Installation Guide - Revision R Figure 93–Heated AOA/Pitot Probe Wiring Overview

Page 194

Accessory Installation and Configuration SkyView System Installation Guide - Revision R 15-5 recommendations for wire gauge choice, given wiri

Page 195

Accessory Installation and Configuration 15-6 SkyView System Installation Guide - Revision R Wire Color Notes Red Connected through a pilot-ac

Page 196 - Additional Resources

Accessory Installation and Configuration SkyView System Installation Guide - Revision R 15-7 Heat Status on EMS Page If an SV-EMS-220 or SV-E

Page 197

Accessory Installation and Configuration 15-8 SkyView System Installation Guide - Revision R Angle of Attack Audio Alert Volume The volume of

Page 198

Accessory Installation and Configuration SkyView System Installation Guide - Revision R 15-9 AOA/Pitot Probe Dimensions Figure 94–Standard Mo

Page 199 - Push-Pull Servo Dimensions

Accessory Installation and Configuration 15-10 SkyView System Installation Guide - Revision R Figure 96–Boom Mount AOA/Pitot Probe Dimensions

Page 200

Accessory Installation and Configuration SkyView System Installation Guide - Revision R 15-11 the performance of the probe. You will, however,

Page 201 - Figure 60 - Shear Screw

System Planning 2-6 SkyView System Installation Guide - Revision R To protect against aircraft electrical failures and anomalies, Dynon Avionic

Page 202

Accessory Installation and Configuration 15-12 SkyView System Installation Guide - Revision R Encoder Serial-to-Gray Code Converter Installati

Page 203

Accessory Installation and Configuration SkyView System Installation Guide - Revision R 15-13 the wires listed in the table leave one end of t

Page 204

Accessory Installation and Configuration 15-14 SkyView System Installation Guide - Revision R Figure 97–Encoder Converter Module Electrical C

Page 205

Accessory Installation and Configuration SkyView System Installation Guide - Revision R 15-15 Capacitance-to-Voltage Converter Installation an

Page 206 - Kit Contents

Accessory Installation and Configuration 15-16 SkyView System Installation Guide - Revision R Video Input Adapter for SkyView (USB) The Video

Page 207

Accessory Installation and Configuration SkyView System Installation Guide - Revision R 15-17 Installation The Video Input Adapter is small an

Page 208

Accessory Installation and Configuration 15-18 SkyView System Installation Guide - Revision R If the Video Input Adapter is connected and wor

Page 209

SkyView System Installation Guide - Revision R 16-1 16. SV-COM-C25 Installation, Configuration, and Testing Note: SV-COM-C25 is the complete ra

Page 210 - Servo Calibration Procedure

SV-COM-C25 Installation, Configuration, and Testing 16-2 SkyView System Installation Guide - Revision R Physical Installation: SV-COM-PANEL SV-C

Page 211 - Autopilot Setup Options

SV-COM-C25 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 16-3 Physical Installation SV-COM-PANEL – VER

Page 212 - Roll Axis Configuration

System Planning SkyView System Installation Guide - Revision R 2-7 SV-ADAHRS-200 and SV-ADAHRS-201 Proper installation of the SV-ADAHRS-200/20

Page 213 - Pitch Axis Configuration

SV-COM-C25 Installation, Configuration, and Testing 16-4 SkyView System Installation Guide - Revision R  COM Antenna, coaxial cable, terminated

Page 214

SV-COM-C25 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 16-5 Figure 101– SV-COM-425 Dimensions – NOT A

Page 215

SV-COM-C25 Installation, Configuration, and Testing 16-6 SkyView System Installation Guide - Revision R Electrical Installation Use this section

Page 216 - Disengage Button Options

SV-COM-C25 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 16-7 Additional harness construction and wirin

Page 217

SV-COM-C25 Installation, Configuration, and Testing 16-8 SkyView System Installation Guide - Revision R SV-COM-425 – Pinout (Male D15) Pin Funct

Page 218

SV-COM-C25 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 16-9 Note that SkyView Network connection(s) o

Page 219

SV-COM-C25 Installation, Configuration, and Testing 16-10 SkyView System Installation Guide - Revision R Shielded cable between SV-COM-425 Pins 1

Page 220

SV-COM-C25 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 16-11 The following figure depicts how a dual

Page 221 - Installation Instructions

SV-COM-C25 Installation, Configuration, and Testing 16-12 SkyView System Installation Guide - Revision R Shielded cable between SV-COM-425 #1 Pin

Page 222 - Electrical Connections

SV-COM-C25 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 16-13 o Shield of the cable from SV-COM-425 #

Page 223

Contact Information Dynon Avionics, Inc. 19825 141st Place NE Woodinville, WA 98072 Phone: (425) 402-0433 - 8:00 AM – 5:00 PM (Pacific Time) Monday –

Page 224

System Planning 2-8 SkyView System Installation Guide - Revision R dynamic magnetic fields (e.g., AC currents, non-constant DC currents, and no

Page 225

SV-COM-C25 Installation, Configuration, and Testing 16-14 SkyView System Installation Guide - Revision R Figure 106 - Headset Jack Schematic Int

Page 226 - Power/Ground Input

SV-COM-C25 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 16-15 SV-COM-425 Pin SV-COM-PANEL Pin Notes 3

Page 227 - Serial RX/TX

SV-COM-C25 Installation, Configuration, and Testing 16-16 SkyView System Installation Guide - Revision R Phones / Headset Connections for SV-INTE

Page 228

SV-COM-C25 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 16-17  Separation of COM antenna from anothe

Page 229 - Antenna Installation

SV-COM-C25 Installation, Configuration, and Testing 16-18 SkyView System Installation Guide - Revision R SkyView System Settings for SV-COM-C25 N

Page 230 - Antenna Cable

SV-COM-C25 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 16-19  Does the (optional) FLIP/FLOP pushbut

Page 232 - Serial Port Setup

SkyView System Installation Guide - Revision R 17-1 17. SV-COM-X83 Installation, Configuration, and Testing Note: SV-COM-X83 is the complete ra

Page 233 - Transponder Settings

SV-COM-X83 Installation, Configuration, and Testing 17-2 SkyView System Installation Guide - Revision R Certification Considerations The SV-COM-

Page 234

SV-COM-X83 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 17-3 Physical Installation SV-COM-PANEL – VE

Page 235

System Planning SkyView System Installation Guide - Revision R 2-9 must be on the bottom. The label must be on the top. Figure 2 shows the corr

Page 236 - Altitude Encoder Calibration

SV-COM-X83 Installation, Configuration, and Testing 17-4 SkyView System Installation Guide - Revision R Figure 109–SV-COM-PANEL - VERTICAL Pane

Page 237 - Transponder Software Updates

SV-COM-X83 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 17-5  Secure the SV-COM-T8 to the aircraft

Page 238

SV-COM-X83 Installation, Configuration, and Testing 17-6 SkyView System Installation Guide - Revision R Figure 110– SV-COM-T8 Dimensions – NOT

Page 239

SV-COM-X83 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 17-7 Electrical Installation Use this section

Page 240

SV-COM-X83 Installation, Configuration, and Testing 17-8 SkyView System Installation Guide - Revision R Electrical Connections Harness Construct

Page 241

SV-COM-X83 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 17-9 Pin Function Notes 15 No Connection (Pin

Page 242 - ARINC-429 Device Connection

SV-COM-X83 Installation, Configuration, and Testing 17-10 SkyView System Installation Guide - Revision R SV-COM-T8 – Pinout (Male D25) Pin Func

Page 243 - SV-ARINC-429 Pinout

SV-COM-X83 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 17-11 Pin Function Notes 22 GROUND IN Connect

Page 244

SV-COM-X83 Installation, Configuration, and Testing 17-12 SkyView System Installation Guide - Revision R  Use the other wire to connect SV-COM

Page 245 - ARINC Device Connections

SV-COM-X83 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 17-13 The following figure depicts how dual S

Page 246

System Planning 2-10 SkyView System Installation Guide - Revision R For most reliable performance, the SV-GPS-250 (like all GPS devices) requi

Page 247

SV-COM-X83 Installation, Configuration, and Testing 17-14 SkyView System Installation Guide - Revision R  On the SV-COM-T8 #1 end, continue th

Page 248

SV-COM-X83 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 17-15  On the SV-INTERCOM-2S end, prep the

Page 249

SV-COM-X83 Installation, Configuration, and Testing 17-16 SkyView System Installation Guide - Revision R The following figure depicts connecting

Page 250

SV-COM-X83 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 17-17 Power/Ground Input The SV-COM-T8 and SV

Page 251

SV-COM-X83 Installation, Configuration, and Testing 17-18 SkyView System Installation Guide - Revision R Phones / Headset Connections for SV-INT

Page 252

SV-COM-X83 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 17-19  Separation of COM antenna(s) from tr

Page 253

SV-COM-X83 Installation, Configuration, and Testing 17-20 SkyView System Installation Guide - Revision R  Avoid routing the cable around tight

Page 254 - Serial Port Connection

SV-COM-X83 Installation, Configuration, and Testing SkyView System Installation Guide - Revision R 17-21  Slide heat shrink tubing forward (fl

Page 255 - VP-X Settings

SV-COM-X83 Installation, Configuration, and Testing 17-22 SkyView System Installation Guide - Revision R  Verify dim commands from SkyView dis

Page 256

SkyView System Installation Guide - Revision R 18-1 18. SV-AP-PANEL Installation This chapter contains pre-installation considerations, installat

Page 257 - Figure 87 - VP-X Example

System Planning SkyView System Installation Guide - Revision R 2-11  There can be only one SV-BAT-320 per display. Do not connect an SV-BAT-3

Page 258

SV-AP-PANEL Installation 18-2 SkyView System Installation Guide - Revision R Physical Installation The following diagrams as printed are NOT t

Page 259

SV-AP-PANEL Installation SkyView System Installation Guide - Revision R 18-3 Figure 117–SV-AP-PANEL Dimensions Electrical Installation SkyView

Page 260

SV-AP-PANEL Installation 18-4 SkyView System Installation Guide - Revision R Note that the SV-AP-PANEL’s trim controller only connects to the t

Page 261 - Electrical Installation

SV-AP-PANEL Installation SkyView System Installation Guide - Revision R 18-5 D15 Pin Pin Function Notes 2 Aircraft Electrical Ground If trim moto

Page 262

SV-AP-PANEL Installation 18-6 SkyView System Installation Guide - Revision R Figure 118 SV-AP-PANEL Trim control wiring diagram Network Setup

Page 263

SV-AP-PANEL Installation SkyView System Installation Guide - Revision R 18-7 > FUNCTION: PITCH We recommend that MOTOR 1 be configured to cont

Page 265 - Antenna BNC Connector

SkyView System Installation Guide - Revision R 19-1 19. SV-KNOB-PANEL Installation This chapter contains pre-installation considerations and inst

Page 266

SV-KNOB-PANEL Installation 19-2 SkyView System Installation Guide - Revision R Physical Installation The following diagrams as printed are NOT

Page 267

SV-KNOB-PANEL Installation SkyView System Installation Guide - Revision R 19-3 Figure 121 – SV-KNOB-PANEL Dimensions Electrical Installation Sk

Page 268

System Planning 2-12 SkyView System Installation Guide - Revision R Mounting Requirements Some SkyView modules include mounting fasteners, whil

Page 270 - Tools and Materials Required

SkyView System Installation Guide - Revision R 20-1 20. Appendix A: Maintenance and Troubleshooting This appendix provides builders, installers a

Page 271

Appendix A: Maintenance and Troubleshooting 20-2 SkyView System Installation Guide - Revision R following directions. Note that there are 3 diff

Page 272

Appendix A: Maintenance and Troubleshooting SkyView System Installation Guide - Revision R 20-3 SV-D1000 / SV-D700 Display Scenario 3: When other

Page 273

Appendix A: Maintenance and Troubleshooting 20-4 SkyView System Installation Guide - Revision R 8. On the recently repaired display, confirm th

Page 274

Appendix A: Maintenance and Troubleshooting SkyView System Installation Guide - Revision R 20-5 INFORMATION). Note that the information in this m

Page 275

Appendix A: Maintenance and Troubleshooting 20-6 SkyView System Installation Guide - Revision R  DISCHARGING: SkyView system voltage is below

Page 276 - AOA/Pitot Probe Mounting

Appendix A: Maintenance and Troubleshooting SkyView System Installation Guide - Revision R 20-7 Button and Joystick States The state of each butt

Page 277 - AOA/Pitot Probe Dimensions

Appendix A: Maintenance and Troubleshooting 20-8 SkyView System Installation Guide - Revision R Test Procedure 1. Fully charge the SV-BAT-320

Page 278 - Pressure Check

Appendix A: Maintenance and Troubleshooting SkyView System Installation Guide - Revision R 20-9  Check network wiring and try again. There may

Page 279 - Calibration

System Planning SkyView System Installation Guide - Revision R 2-13 Splitters and Gender Changers Splitters (SV-NET-SPL) use aircraft-grade Tef

Page 280 - Transponder Wiring

Appendix A: Maintenance and Troubleshooting 20-10 SkyView System Installation Guide - Revision R  Check power wiring and fuses and try again.

Page 281

SkyView System Installation Guide - Revision R 21-1 21. Appendix B: Specifications SkyView Equipment Weights SkyView Equipment Description Weight

Page 282

Appendix B: Specifications 21-2 SkyView System Installation Guide - Revision R SkyView Equipment Description Weight SV-NET-6CC 5.2 oz (0.147 k

Page 283

Appendix B: Specifications SkyView System Installation Guide - Revision R 21-3 OAT Probe -40° F to 150° F 3/8” hole in fuselage, 9/16” nut 100

Page 284

Appendix B: Specifications 21-4 SkyView System Installation Guide - Revision R SV-XPNDR-261 Specifications Specification Characteristics Compl

Page 285 - Checkout and Operation

Appendix B: Specifications SkyView System Installation Guide - Revision R 21-5 SV-XPNDR-262 Specifications Specification Characteristics Compl

Page 286

Appendix B: Specifications 21-6 SkyView System Installation Guide - Revision R SV-COM-C25 Radio Frequency Specifications Specification Charact

Page 287

Appendix B: Specifications SkyView System Installation Guide - Revision R 21-7 Specification Characteristics Transmitter Frequency 118.000 MHz

Page 289

SkyView System Installation Guide - Revision R 22-1 22. Appendix C: Wiring and Electrical Connections SkyView utilizes standardized network conne

Page 290

System Planning 2-14 SkyView System Installation Guide - Revision R Figure 4 - SV-NET-HUB Dimensions Test SkyView Network Cable SkyView displa

Page 291

Appendix C: Wiring and Electrical Connections 22-2 SkyView System Installation Guide - Revision R D-subminiature Crimp Contacts and Tools D-sub

Page 292

` Appendix C: Wiring and Electrical Connections SkyView System Installation Guide - Revision R 22-3 9-Pin Connector Pin # Wire Color (Dynon Con

Page 293

Appendix C: Wiring and Electrical Connections 22-4 SkyView System Installation Guide - Revision R USB Cable (from D37 connector) The USB cable

Page 294

` Appendix C: Wiring and Electrical Connections SkyView System Installation Guide - Revision R 22-5  One standard 8-pin RJ45 connector for us

Page 295

Appendix C: Wiring and Electrical Connections 22-6 SkyView System Installation Guide - Revision R Figure 124–SV-EMS-220/221 Connectors The Sky

Page 296

` Appendix C: Wiring and Electrical Connections SkyView System Installation Guide - Revision R 22-7 SkyView D37 Harness Pin-Out SkyView Displa

Page 297

Appendix C: Wiring and Electrical Connections 22-8 SkyView System Installation Guide - Revision R Table 72–SkyView Display Male D37 Pin-out wit

Page 298

` Appendix C: Wiring and Electrical Connections SkyView System Installation Guide - Revision R 22-9 SkyView Network Connection Pin-Out SkyView

Page 299

Appendix C: Wiring and Electrical Connections 22-10 SkyView System Installation Guide - Revision R Figure 126–SkyView Network Female D9 Pin In

Page 300

` Appendix C: Wiring and Electrical Connections SkyView System Installation Guide - Revision R 22-11 SV-EMS-220 Male D37 Pin EMS 37-pin Harness

Page 301 - Optional Flip / Flop Button

System Planning SkyView System Installation Guide - Revision R 2-15 The Ethernet connection between SkyView displays is made in addition to the

Page 302

Appendix C: Wiring and Electrical Connections 22-12 SkyView System Installation Guide - Revision R SV-EMS-221 D37 Pin EMS 37-pin Harness Wire C

Page 303

` Appendix C: Wiring and Electrical Connections SkyView System Installation Guide - Revision R 22-13 SV-EMS-220/221 Female D25 Thermocouple Con

Page 304

Appendix C: Wiring and Electrical Connections 22-14 SkyView System Installation Guide - Revision R SV-ARINC-429 Pin-Out Pin Function Notes 1 No

Page 305

` Appendix C: Wiring and Electrical Connections SkyView System Installation Guide - Revision R 22-15 SV-ADSB-470 Pin-out Pin Function Notes 1

Page 306

Appendix C: Wiring and Electrical Connections 22-16 SkyView System Installation Guide - Revision R 15 11-33V DC Connect to Aircraft Power 16 No

Page 307

` Appendix C: Wiring and Electrical Connections SkyView System Installation Guide - Revision R 22-17 Explosion 9.0 Equipment identified as Cate

Page 308 - Certification Considerations

Appendix C: Wiring and Electrical Connections 22-18 SkyView System Installation Guide - Revision R Vibration 8.0 Aircraft zone 2; type 3, 4, 5

Page 309

` Appendix C: Wiring and Electrical Connections SkyView System Installation Guide - Revision R 22-19 Position Longitude 0,5 Quality Indicator (

Page 310

Appendix C: Wiring and Electrical Connections 22-20 SkyView System Installation Guide - Revision R AMC 20-24 Compliance The TT21 or TT22 transp

Page 311

` Appendix C: Wiring and Electrical Connections SkyView System Installation Guide - Revision R 22-21 Explosion 9.0 Equipment identified as Cate

Page 312

System Planning 2-16 SkyView System Installation Guide - Revision R Dynon Part Number Description SV-NET-SERVO SkyView Network Cabling Kit for

Page 314

SkyView System Installation Guide - Revision R 23-1 23. Appendix D: SV-EMS-220/221 Sensor Input Mapping Worksheet Use this worksheet to record SV-

Page 315

Appendix D: SV-EMS-220/221 Sensor Input Mapping Worksheet 23-2 SkyView System Installation Guide - Revision R Pin Function Sensor Name C37 P33/35

Page 316

SkyView System Installation Guide - Revision R 24-1 24. Appendix E: Serial Data Output Any of SkyView’s five RS232 serial ports can be configured

Page 317

Appendix E: Serial Data Output 24-2 SkyView System Installation Guide - Revision R DYNON ADAHRS Serial Data Format The following section detail

Page 318

Appendix E: Serial Data Output SkyView System Installation Guide - Revision R 24-3 Position Width Name Description 34 4 Turn Rate (deg/s) +/- t

Page 319

Appendix E: Serial Data Output 24-4 SkyView System Installation Guide - Revision R DYNON SYSTEM Serial Data Format The following section detail

Page 320

Appendix E: Serial Data Output SkyView System Installation Guide - Revision R 24-5 Position Width Name Description 41 1 AP Engaged 0-7. 0=Off,

Page 321

Appendix E: Serial Data Output 24-6 SkyView System Installation Guide - Revision R Position Width Name Description 64 3 AP Yaw Force +/- then 0

Page 322

Appendix E: Serial Data Output SkyView System Installation Guide - Revision R 24-7 DYNON EMS Serial Data Format The following section details t

Page 323

System Planning SkyView System Installation Guide - Revision R 2-17 Figure 7–SkyView System with Two Redundant Displays, One EMS, Two Backup B

Page 324

Appendix E: Serial Data Output 24-8 SkyView System Installation Guide - Revision R Position Width Name Pin Description 36 3 Fuel Pressure (PSI)

Page 325

Appendix E: Serial Data Output SkyView System Installation Guide - Revision R 24-9 Position Width Name Pin Description 92 4 Thermocouple 7 (deg

Page 326

Appendix E: Serial Data Output 24-10 SkyView System Installation Guide - Revision R Position Width Name Pin Description 196 6 GP Input 13 C37 P

Page 327

Appendix E: Serial Data Output SkyView System Installation Guide - Revision R 24-11  ZZZZ if the input is not configured  G if the signal i

Page 328

Appendix E: Serial Data Output 24-12 SkyView System Installation Guide - Revision R !3221144705060+09323632363272057057164263263000280280+12000

Page 329

Appendix E: Serial Data Output SkyView System Installation Guide - Revision R 24-13 NMEA OUT ( FULL) NMEA OUT (FULL) data consists of all of th

Page 331

SkyView System Installation Guide - Revision R 25-1 25. Appendix F: User Data Logs SkyView continuously stores three retrievable data logs that c

Page 332

Appendix F: User Data Logs 25-2 SkyView System Installation Guide - Revision R Recent Flight Data Log Filename format: DATE-TAILNUMBER-FIRMWAR

Page 333 - SV-AP-PANEL Installation

Appendix F: User Data Logs SkyView System Installation Guide - Revision R 25-3 Navigate to SETUP MENU > SYSTEM SETUP > DATA LOG SETUP &g

Page 334 - Network Setup

iv SkyView System Installation Guide - Revision R Dynon Avionics retains the exclusive right to repair or replace the instrument or firmware or offer

Page 335

System Planning 2-18 SkyView System Installation Guide - Revision R Figure 8– SkyView System with Two Redundant Displays, One EMS, Two Backup

Page 337

SkyView System Installation Guide - Revision R 26-1 26. Appendix G: Kavlico Pressure Sensor Part Numbers Kavlico pressure sensors sold by Dynon A

Page 338

System Planning SkyView System Installation Guide - Revision R 2-19 Figure 9 - SkyView System with Two Redundant Displays, One EMS, Two Backup

Page 339

System Planning 2-20 SkyView System Installation Guide - Revision R Serial Devices and SV-ARINC-429 Installation and Configuration sections of

Page 340

SkyView System Installation Guide - Revision R 3-1 3. Basic SkyView Display Operation After reading this chapter, you should be familiar with bas

Page 341 - Taking a Screenshot

Basic SkyView Display Operation 3-2 SkyView System Installation Guide - Revision R Display Bezel Layout The following diagram illustrates the f

Page 342

Basic SkyView Display Operation SkyView System Installation Guide - Revision R 3-3 The set of button labels displayed immediately after the disp

Page 343

Basic SkyView Display Operation 3-4 SkyView System Installation Guide - Revision R A button has a function if there is a label above it. If the

Page 344 - Operational Status

Basic SkyView Display Operation SkyView System Installation Guide - Revision R 3-5 SkyView Touch SV-D1000T displays can be controlled via touch i

Page 345 - Display Input Voltage

Basic SkyView Display Operation 3-6 SkyView System Installation Guide - Revision R Reset adjustable value Press DEFAULT Save settings and retur

Page 346

Basic SkyView Display Operation SkyView System Installation Guide - Revision R 3-7 How to Reboot the Display Press and hold buttons 1, 2 and 5 si

Page 347 - Annual Backup Battery Test

SkyView System Installation Guide - Revision R v Revision Revision Date Description Color-coded the connectors in the example SkyView systems figur

Page 348 - Troubleshooting

Basic SkyView Display Operation 3-8 SkyView System Installation Guide - Revision R You may also access the Setup Menu from the In Flight Setup

Page 349 - Display does not Turn On

Basic SkyView Display Operation SkyView System Installation Guide - Revision R 3-9 Message Notification Area Important alerts are relayed to user

Page 350

Basic SkyView Display Operation 3-10 SkyView System Installation Guide - Revision R Pages and wizards that require users to do something have

Page 351 - SkyView Equipment Weights

Basic SkyView Display Operation SkyView System Installation Guide - Revision R 3-11  NETWORK SETUP – Enter this menu to configure your SkyView

Page 352

Basic SkyView Display Operation 3-12 SkyView System Installation Guide - Revision R  LICENSE – This page shows the status of software product

Page 353

Basic SkyView Display Operation SkyView System Installation Guide - Revision R 3-13  SHOW WIDE ANGLE VIEW BUTTON – Enables / disables the appea

Page 354 - SV-XPNDR-261 Specifications

Basic SkyView Display Operation 3-14 SkyView System Installation Guide - Revision R  Roll Axis–Enter this menu to configure autopilot roll ax

Page 355 - SV-XPNDR-262 Specifications

Basic SkyView Display Operation SkyView System Installation Guide - Revision R 3-15 Updating the firmware on a SkyView display automatically upd

Page 356

Basic SkyView Display Operation 3-16 SkyView System Installation Guide - Revision R Figure 15 – Some SkyView Network devices not online, canno

Page 357

Basic SkyView Display Operation SkyView System Installation Guide - Revision R 3-17 How to Load and Delete Files 1. Download file from Error! Hy

Page 358

vi SkyView System Installation Guide - Revision R Revision Revision Date Description Added OAT connection information for customers making their own

Page 360 - Twisted Pairs

SkyView System Installation Guide - Revision R 4-1 4. SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration This chapter contains informa

Page 361

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-2 SkyView System Installation Guide - Revision R Physical Installation SV-D700 I

Page 362 - OAT Connection

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-3 Figure 17–SV-D700 Panel Cutout

Page 363

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-4 SkyView System Installation Guide - Revision R Figure 18–SV-D1000 Panel Cutout

Page 364 - Servo Harness Pin-Out

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-5 Figure 19–SV-D700 Dimensions

Page 365 - SkyView D37 Harness Pin-Out

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-6 SkyView System Installation Guide - Revision R Figure 20–SV-D1000 / SV-D1000T

Page 366 - SkyView D37 Block Diagram

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-7 Electrical Installation Use this

Page 367

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-8 SkyView System Installation Guide - Revision R SV-BAT-320 can keep most SkyView

Page 368 - SV-EMS-220/221 Pin-Out

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-9 further setup tasks can be perfo

Page 369

SkyView System Installation Guide - Revision R vii Revision Revision Date Description Added SV-XPNDR-261/262 power wire size recommendation. Added

Page 370 - 456180 only) sensor power

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-10 SkyView System Installation Guide - Revision R Figure 22–Successful SkyView N

Page 371

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-11 If you see a screen similar to

Page 372 - SV-ARINC-429 Pin-Out

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-12 SkyView System Installation Guide - Revision R Vertical Power VP-X, and Emerge

Page 373 - SV-XPNDR-261/262 Pin-Out

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-13 a. Power down all displays exc

Page 374

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-14 SkyView System Installation Guide - Revision R based on the completeness of th

Page 375

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-15 External Serial Altitude Encode

Page 376 - ADS-B Parameters Supported

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-16 SkyView System Installation Guide - Revision R ICARUS Trimble Baud rate 9600 F

Page 377 - FAA 91.227 Compliance

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-17 Reference the Serial Port Confi

Page 378 - AMC 20-24 Compliance

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-18 SkyView System Installation Guide - Revision R  *A108.00 Rs I:xxx (the *x*&a

Page 379

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-19  Connect TY91 RS232 Out (TC90

Page 380

viii SkyView System Installation Guide - Revision R Revision Revision Date Description L July 2012 Clarified obtaining HEX CODEs for mode S operation

Page 381

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-20 SkyView System Installation Guide - Revision R  On the V6/V10, configure the

Page 382

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-21 Emergency Location Transmitter

Page 383

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-22 SkyView System Installation Guide - Revision R USB Usage and Accessibility It

Page 384

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-23 If you are converting a Dynon

Page 385

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-24 SkyView System Installation Guide - Revision R SkyView Audio Output Settings G

Page 386

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-25 How to Access Display Hardware

Page 387

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-26 SkyView System Installation Guide - Revision R  POS devices provide only pos

Page 388

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-27 4. Set serial 1 baud rate to 9

Page 389 - DYNON EMS Serial Data Format

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-28 SkyView System Installation Guide - Revision R Press the ACCEPT button to sav

Page 390

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration SkyView System Installation Guide - Revision R 4-29 on. At network configuration ti

Page 391

SkyView System Installation Guide - Revision R ix Revision Revision Date Description adjusted in the normal process of installing an autopilot serv

Page 392 - GP Inputs

SV-D700 / SV-D1000 / SV-D1000T Installation and Configuration 4-30 SkyView System Installation Guide - Revision R  Required: The relevant page

Page 393

SkyView System Installation Guide - Revision R 5-1 5. SV-ADAHRS-200/201 Installation and Configuration The SkyView ADAHRS module uses MEMS sensor

Page 394 - NMEA OUT Serial Data Formats

SV-ADAHRS-200/201 Installation and Configuration 5-2 SkyView System Installation Guide - Revision R Figure 24–Suggested SV-ADAHRS-200/201 Install

Page 395 - NMEA OUT ( FULL)

SV-ADAHRS-200/201 Installation and Configuration SkyView System Installation Guide - Revision R 5-3 An SV-ADAHRS-200/201 should be mounted within

Page 396

SV-ADAHRS-200/201 Installation and Configuration 5-4 SkyView System Installation Guide - Revision R Pneumatic Ports The AOA, pitot, and static po

Page 397 - User Data Log

SV-ADAHRS-200/201 Installation and Configuration SkyView System Installation Guide - Revision R 5-5 It is important to calibrate magnetic headin

Page 398 - Alert Data Log

SV-ADAHRS-200/201 Installation and Configuration 5-6 SkyView System Installation Guide - Revision R  Engine heat and exhaust  Aircraft interi

Page 399 - Exporting Data Logs

SV-ADAHRS-200/201 Installation and Configuration SkyView System Installation Guide - Revision R 5-7 If the OAT probe is installed correctly, ther

Page 400

SV-ADAHRS-200/201 Installation and Configuration 5-8 SkyView System Installation Guide - Revision R following parameters determine which ADAHRS i

Page 401

SV-ADAHRS-200/201 Installation and Configuration SkyView System Installation Guide - Revision R 5-9 The values on this page are default values th

Commentaires sur ces manuels

Pas de commentaire